983RV Life983RV Life
  • Build Log
  • Research
  • Additional Builders
  • Travel

Build Log

Empennage

Day 4 – Rear Spar – Take 2!

September 15th, 2020 Page 6-2: Step 1 & 2 I just got cleared to start doing work again. I’ve been out since June 24th due to rotator cuff repair. I will say, I wouldn’t wish that on my worst enemy. I got almost back to where I was before my Read more

By olanandkate, 5 yearsSeptember 16, 2020 ago
Empennage

Day 3 – Rear Spar and Spar Caps Reordered

July 10th, 2020 Page 6-2: Step 4 I’m glad I found my mistake early on in the build. And it reinforces to me the absolute importance of reading sentence by sentence and understanding exactly what they are expecting. Also… Don’t have preconceived idea of what they want either. My first Read more

By olanandkate, 5 yearsJuly 11, 2020 ago
Empennage

Day 2 – Rear Spar & Spar Cap Match Drilling

July 9th, 2020 Page 6-2: Step 2 & 3 Not a ton to write about today. I got the holes match drilled between the rear spar and the spar caps. The only odd thing is that, even with them held firmly together, the shavings from near by holes would cause Read more

By olanandkate, 5 yearsJuly 10, 2020 ago
Empennage

Day 1 – Initial Cuts – Vertical Stabilizer

July 8th, 2020 Page 6-2: Step 1 I was cleared by my doctor today to do some very small movement of my shoulder. I didn’t waste anytime getting into the garage to get started on the plane 🙂 I honestly did not use my left arm much but to guide Read more

By olanandkate, 5 yearsJuly 9, 2020 ago
Empennage

First Build Hour

I just recently had rotator cuff repair surgery so I’m not going to be able to do too much with the build for another month or so. But I did want to go on ahead and get everything organized and ready to go. I had my boys take all of Read more

By olanandkate, 5 yearsJuly 4, 2020 ago
Empennage

Empennage kit has arrived!

As of June 22, 2020, I now have the empennage kit in my possession. I will say there was a little bit of hassle to get it here which was partially my own fault plus that of ABF Freight. The kit arrived in Oklahoma City and was ready for delivery Read more

By olanandkate, 5 yearsJune 23, 2020 ago
Tools

New Vise and Soft Grips

I had been limping along with a small and inexpensive Bessey 4″ vise that I got from Home Depot a while back. It was rusting pretty bad and I couldn’t seem to get it to grip anything anymore like it should. I didn’t feel like using a cheater bar because Read more

By olanandkate, 5 yearsMay 31, 2020 ago
Workshop

More Tools, Building Practice, and Shop Prep

I wanted to first start off with a video of the final product of what the shop lights look like. They turned out great for the amount of money that was spent. I would really have preferred to have had light boxes installed in the ceiling, but that’s money I Read more

By olanandkate, 5 yearsMay 30, 2020 ago
Tools

Additional Lights & Tools

My second shipment of lights has finally arrived. I’m not sure why they are shipping all three lights in different boxes, but oh well. It was easy to add this second set of lights and oh man it has gotten nice and bright in the garage! I will definitely not Read more

By olanandkate, 5 yearsMay 21, 2020 ago
Workshop

Honeywell LED Shop Lights

I got the first of three pairs of these lights in the mail today. I bought these from Lowe’s online. The model # is SH450505Q200 and the Lowe’s part number is 2500105. I like these for a couple of reasons. They are easily daisy chained using a standard outlet plug Read more

By olanandkate, 5 yearsMay 19, 2020 ago

Posts pagination

Previous 1 … 29 30 31 Next

Aircraft Build Time

Airplane sectionBuild time (hrs)
Avionics/Electronics9
S06 - Vertical Stabilizer22.5
S07 - Rudder34.25
S08 - Horizontal Stabilizer49.75
S09 - Elevators59
S10 - Tailcone75.75
S11 - Empennage Attach27.75
S12 - Empennage Fairings26.5
S13 - Main Spar18.25
S14 - Wing Ribs35.5
S15 - Rear Spar29.25
S16 - Top Skins32.75
S17 - Outboard Leading Edge34.75
S18 - Fuel Tank79.5
S20 - Bottom Skins42.25
S21 - Aileron35.5
S22 - Flap44
S23 - Aileron Actuation11
S24 - Wing Tip Installation14.5
S25 - Mid Fuselage Bulkheads0.25
S26 - Mid Fuselage Ribs Bottom Skins0.25
S27 - Firewall0.25
S28 - Forward Fuselage Bulkhead Ribs0.25
S29 - Fuselage Side Skins4
S30 - Step Installation2
S31 - Upper Forward Fuselage0.25
S32 - Tailcone Attach14.75
S33 - Baggage Area1.5
S35 - Access & Floors3.5
S36 - Brake Lines4.5
S38 - Rudder Pedals & Brake System12.5
Total725.75
Recent Posts
  • Quickbuild Review Logging – Section 31
  • Quickbuild Review Logging – Section 28
  • Quickbuild Review Logging – Section 27
  • Quickbuild Review Logging – Section 26
  • Quickbuild Review Logging – Section 25
Recent Comments
    Archives
    • September 2025
    • August 2025
    • July 2025
    • June 2025
    • May 2025
    • April 2025
    • February 2025
    • January 2025
    • December 2024
    • October 2024
    • September 2024
    • August 2024
    • July 2024
    • September 2023
    • August 2023
    • July 2023
    • June 2023
    • May 2023
    • January 2023
    • December 2022
    • September 2022
    • August 2022
    • April 2022
    • March 2022
    • December 2021
    • November 2021
    • June 2021
    • May 2021
    • April 2021
    • February 2021
    • January 2021
    • December 2020
    • November 2020
    • October 2020
    • September 2020
    • July 2020
    • June 2020
    • May 2020
    Categories
    • Avionics
    • Costs
    • Empennage
    • Fuel System
    • Fuselage
    • Research
    • Tools
    • Travel
    • Uncategorized
    • Wings
    • Workshop
    Hestia | Developed by ThemeIsle