The fuel inlet lines to the fuel valve only needed a slight modification to get them to hook up. But the fuel outlet needed a new line run. I got that done but it took me two tries. I ended up making the first attempt too short but the second Read more
I’m getting close to finishing up this part. I got the new plate drilled for rivets, deburred, primed and riveted in. I then installed the Andair fuel valve, cut the extension to the length I needed it, modified the cover to accept the fuel selector and installed that. Now I Read more
I ended up wasting a bit of time tonight by not using the right tools. I tried to be precise by hand and that was a terrible idea. Ended up wasting an hour. But I went the second time around using the drill press and other items and got it Read more
the Andair value arrived from the UK today. It is definitely quality and is almost a direct replacement for the Vans fuel selector. The selector is very smooth in its operation and I will feel much better switching tanks with this valve. I will need to cut a larger hole Read more
I finished the last two lines of the fuel system this morning. The one that took the longest was the short one. Those are seriously the hardest ones to make because there is no room for error, and trying to measure the distance between offsetting lines is difficult because you Read more
The auxiliary fuel pump, filter, and transducer have arrived. I need to get bolts now for the transducer but I used some extra long bolts to at least hold it in place for now while I do fuel lines. Trying to make small fuel lines out of hard lines is Read more
I got all of the fuel lines installed that I can until the fuel pump and filter and flow meter come in. I also got the rubber bushing installed for the exterior penetration point for the fuel lines and the mounting brackets for the pump and filter. Took quite a Read more
I didn’t spend a ton of time on the plane today as I went to visit some members in distress in our ward boundaries. But I did get the fuel selector installed as well as the firewall and under the seat fittings. The rest just requires me cutting, bending, and Read more