Flap

I got the frame riveted together and all of the skins on. Now I just have to wait for the outboard skin to go on before I can put the brass bushings in and mount the flap to the wing.

I started off the morning by countersinking the trailing edge wedges. I then got all of the parts primed this morning before going to the temple and when I got back they were cured and ready to go. I did some work on the wings first and I finished the Read more

The parts came in a few days early so I got them drilled and prepped today. I have one last step before I prime tomorrow which is getting the trailing edge wedge countersunk. Then I can prime this along with the wing parts I prepped today as well and I’ll Read more

The skins are at least on for the last time now so I went ahead and mounted the right flap. Man it looks so much bigger now!

It took 4 hours but I got it done! I was kind of lazily watching Airventure at the same time but I got it done none the less. It is SUPER straight just like how the ailerons were. I’ve learned that the drilling of that trailing edge is critical to Read more

I got all of the top portion of the riveting done. Took a bit as I didn’t measure the shank of the rivets I put in which were the 3.5 size. I did one rivet and realized it was too short. I had to pull all of the ones I Read more

I got all of the parts primed today and I assembled the nose ribs. I realized one of the ribs I drilled the nut plates holes when I didn’t need it. Not a huge deal but I just assumed since I was drilling the bolt holes I needed the nut Read more

Aside from the tank work today, I spent a little bit of time getting everything cleaned and ready for primer. Not much else to say here as most of the work was done on the tanks today.

I completely forgot to do the edge bending so that it doesn’t pillow out on the trailing edge as well as on the skin overlaps. I took the edging tool and ran it between each of the dimples. It seemed to work as I had previously done it for the Read more