Tank Tests – One Good One Bad

The first thing I got to was the tanks. My testing kit arrived and I got it all setup. Luckily the right tank did not have any leaks, but the left tank had two. But luckily those two leaks were right near the gas cap so I was able to reach them with my finger. I got them sealed from the inside and then I put a little on the outside that I will scrape some away later after it cures. I put a tiny bit of pressure on it so that it could push some of the sealant a little bit deeper into the leaking passages and I’ll leave it like that over night. It should be enough pressure to push some sealant in but not enough to blow a hole through it since that sealant is so thick.