I got the spar extension parts deburred and primed. I also went ahead and cut all of the J channel stiffeners but I realized it was going to take alot more work to get those ready for priming so I put them to the side and riveted the extensions on to the spar. My next step is to make sure the spar is 100% level on my saw horses and then get the J channels match drilled.
There are two questions that I now need to bring to Van’s on Monday when I get a chance. First off, as you’ll see from the image below, I drilled the wrong hole for the Read more…
I spent just a small amount of time making sure that the holes for the skins and the ribs were already final sized. I picked a few random holes and they all were exactly the Read more…
I decided to at least get a peak at how well the skins fit today by clecoing them on. It took a bit of time but I got it on successfully without any major issues.
0 Comments